flashing led stop sign

The innovative and flexible design of smart road studs provides drivers with an early sense of the road ahead, giving them more time to react accordingly. The revolutionary smart road studs are suitable for a wide range of applications from dynamic lane markings and tunnel delineation to pedestrian crossing systems and are effective in all lighting conditions, making them a smart choice for improving driver awareness and behavior on the road Road safety has had a clear impact.

What applications are flashing LED STOP signs best suited for?
Installing flashing LED STOP signs at an intersection in response to a serious collision is unlikely to be an effective approach because the density of serious right-angle collisions at through intersections is low, only a few collisions involve running STOP signs, and there is a lack of consistent Collision reduction estimates.

NOKIN recommends that alternative improvements at intersections should be considered before opting for solar flashing led stop sign, such as:
? Install stop signs or sidewalk information
? Increase the size of the STOP sign or add a second sign to the left
? Add reflective strips to the STOP sign bracket
? Install lateral rumble strips
? Add stop bar

NOKIN Solar flashing Pedestrian Crossing signs are made to keep pedestrians safe. Even when solar powered, the lights are never dull, Solar flashing Pedestrian Crossing have been programmed to remain at top power even on overcast days. These pedestrian warning signs are designed to alert all motorists when a crosswalk is in use by a pedestrian.

NOKIN flashing led stop sign are outdoor weather resistant and 100% Solar Powered. Each module will run 24/7 with no power required and can last up to 15 days without sunlight.

How effective are Octagonal flashing led stop sign? Research1 documents three primary performance measures for flashing led stop sign: (1) deceleration rates of approaching vehicles, (2) the fraction of vehicles making a complete stop, and (3) change in the frequency of crashes at the intersection.

NOKIN solar powered Crosswalk traffic sign will increase visibility for drivers on the road or in shopping centers with its bright blinking (flashing) LED lights. NOKIN solar powered Crosswalk traffic sign can be used on streets, in parking lots and more. Since these are solar powered, they can be used anywhere there is sun light.

NOKIN solar flashing led stop sign with Type IX reflective sheeting provides outstanding reflective brightness, day or night.
Red LED Lights on 30¡å- 48¡å Sign. LEDs extend the visibility of the sign under all weather conditions. solar flashing led stop signare weatherproof to prevent outside elements from entering the internal casing. NOKIN Solar flashing led stop sign Fast, easy installation, low maintenance.

NOKIN solar stop sign Features:
* solar stop sign Easy to Install and Use
* Dimensions – 30-inch octagon
* MUTCD R1-1
* MUTCD Section 2A.07 compliant for retro-reflectivity and illumination
* Combines aluminum alloy board and solar board for optimum function and durability
* Made from 3M engineer grade prismatic reflective sheeting
* Flashing or constant lighting options
* Solar stop sign Can be programmed to work either 12 or 24 hours per day
* LED’s are placed within the sign’s word and border
* Flashes at a rate of 50 times per minute
* Works 5-7 days on one full charge
* Adjustable solar panel on top of the sign
* Lithium battery 7.4V/4400AH, life span of 3-5 years

what are the most suitable applications for solar flashing led stop sign?
Installing solar flashing led stop sign reactively in response to one severe crash at one intersection is not likely to be an effective approach because of a low density of severe right-angle crashes at through-stop intersections, only a minority of crashes involve running the STOP sign, and a lack of consistent crash reduction estimate.

The LED flash functions of NOKIN solar stop sign can be set to a variety of modes including auto-dimming for energy saving. Signs are 100% waterproof and the sheeting provides maximum reflectivity.

The purpose of flashing led stop sign is to capture the driver¡¯s attention through supplemental visual input. It is intended to increase stopping compliance and prevent right-angle crashes by alerting drivers of upcoming roadway changes so they do not unintentionally run the flashing led stop sign. Right-angle crashes are the most common type of crash that result in a fatality or serious injury at through-stop controlled intersections. Although some crashes involve drivers running a STOP sign, nearly two-thirds of angle crashes are attributed to drivers not selecting a large enough gap between their car and the approaching vehicle on the major road to safely complete a crossing or turning maneuver.

NOKIN MUTCD flashing led stop sign With an LED life expectancy of over 100,000 hours, NOKIN flashing led stop sign should be your first choice over regular stop signs.
Meets or exceeds MUTCD #R1-1 sign specifications.
NOKIN flashing led stop sign ships complete with lithium batteries, solar panel and mounting hardware to fit on a round, square or u-shape post. Must ship ground as batteries contain lithium.

A potentially more effective approach would be to install flashing led stop sign selectively at the few intersections along a system that have actually experienced multiple crashes from drivers running stop signs.

Each NOKIN led stop sign for sale snaps together with ease- a series of 45 degree connectors light the perimeter of the led stop sign, and can be assembled in under 15 minutes.

Flashing LED Illuminated STOP signs are available in a range of sizes and flashing options to ensure that each sign meets the specific needs for your intersection. Standard size for roadways is typically 30 x 30 inch but requirements for size vary from state to state¡ªit is the responsibility of the purchaser to ensure Flashing LED Illuminated STOP signs meet local specifications.

Light-emitting diode (LED)-enhanced Octagonal solar stop signs are the familiar octagonal red signs with white lettering that also include red LEDs on the outer edge of the sign. The LEDs are configured to either operate continually, or to only flash when a detection system senses a vehicle approaching the solar stop sign.

Busy intersections, crossings at high-speed roads, and stops around curves and bends can pose serious danger to drivers and pedestrians, particularly at night and in rain, snow or fog. NOKIN solar powered LED stop sign grabs drivers attention. Its bright blinking lights and reflective material can been seen from 2,500 feet. It is not only an enhanced safety sign option, Solar powered LED stop sign is also energy efficient and versatile. The rechargeable battery and mountable solar panel allow for illuminated stop signs wherever there is sunlight.

The NOKIN Solar Powered Flashing LED Stop Sign is the future of road safety. NOKIN Stop Signs operate 24/7 with no hardwire power required- it can even operate up to 360 hours without sunlight!

NOKIN flashing led stop sign Details:
* MUTCD Section 2A.07 Compliant.
* MUTCD R1-1
* Type IX Reflective Sheeting provides outstanding reflective brightness during the day and at night.
* Four 1?” Red LED lights on 24″ signs.
* Eight 1?” Red LED lights on 30″ ¨C 48″ signs.
* LEDs extend the visibility of the flashing led stop sign under all weather conditions.
* Highway Grade .080 Aluminum construction provides resistance to corrosion.
* Stainless Steel Security Fasteners and TufNut Mounting Hardware (if applicable) are included to keep the sign secure.
* flashing led stop sign are weatherproof to prevent outside elements from entering the internal casing.
* Fast, easy installation and low maintenance.Signs come with 24/7 Flash, upgrades are available. Listed below.

Each NOKIN solar flashing led stop sign has an extremely high Lumen output- and can effectively improve hazardous roadway conditions and reduce chance of roadway accidents.

Flashing led stop sign Features:
* MUTCD-compliant
* High-power LEDs are visible more than 1 mile away and heighten driver awareness in bright daylight, night, fog, rain and snow
* Flashing led stop sign visibility is broken into daytime and night time
* Lightweight unit comes fully assembled, making installation onto any new or existing sign post quick and easy
* Fully encapsulated wiring protects against inclement weather, tampering and vandalism
* Variable diming circuitry automatically adjusts brightness levels, maintaining optimal LED output and extending battery life
* Optional synchronizes multiple flashing led stop sign at an intersection
* Available solar and AC power options enable work in any situation

¡¤Illumination of a led stop sign by Light emitting diodes (LEDs)
¡¤Sign Element to be Illuminated: (1) Symbol or word message (2) Portions of the sign border
¡¤LED’s are placed within 1 border unit of border and within words
¡¤LED’s are red in color
¡¤LED’s are within 1/4″ in width
¡¤LED’s flashing at a rate of 50 times per minute
¡¤Background of sled stop sign is standard 3M reflective engineering grade material

LED stop sign Potential Benefits
In general, led stop sign are used to:
* Improve driver compliance with regulatory signs through improved conspicuity; and
* Enhance visibility and recognition of regulatory and warning signs to drivers, especially under low-light or low-visibility conditions.