If the solar powered road stud cannot withstand a certain pressure, it will not work properly after the car is crushed or impacted. Therefore, compression resistance should be the most basic condition for the normal characteristics of the solar studs. The solar powered road stud itself is an electronic product, and it is very difficult to have high compression performance of its electronic components. Therefore, in general, the solar powered road stud's compression performance is worse than that of ordinary road studs. some. At present, according to the relevant technical standards of the Ministry of Transport, the compression index of solar road studs must reach 10 tons.
There are several methods to effectively improve the compression resistance of solar powered road studs. First, the exposed solar panels use PC bulletproof materials to enhance the pressure resistance of their electronic components. The second is to use IC control as much as possible. Reduce the volume of the electronic circuit, and reduce the pressure on the electronic components. Third, design some ribs on the housing to share the pressure on the electronic components.
The other two characteristics of solar road suds:
The reflective brightness of ordinary reflective road studs is only 300MCD to 400MCD, while the luminous brightness of solar powered road studs can reach 2000MCD, which is 6 to 7 times the former. Such high-intensity light can penetrate rain and fog at night, guiding the driver safely and effectively.
Solar powered road studs flicker at a certain frequency at night, and its dynamic warning effect is very strong. Active light not only can avoid rain and fog interference to the greatest extent, but also can make the driver's sight free from the dependence on car lights.
Nokin's self-developed solar powered road stud NK-RS-X5 have a compressive strength of up to 40tons. If you need such heavy duty solar road studs, please contact Nokin Traffic for product details!
