As solar road stud lights are increasingly used in road safety, it is important to install them correctly. Here are the detailed steps to install solar road stud lights to help ensure that the road studs work best and last longer.
1. Choose a good installation location and clean the road First, choose a suitable installation location. Typically, road studs need to be installed in the center line of the road, at the edge, or in a specific warning area. After selecting the location, use a brush or high-pressure air gun to remove dust, oil, and other debris from the ground to ensure that the surface is clean and flat. This is a key step to ensure a strong bond.
2. Apply adhesive to the bottom of the road stud Use a high-strength, weather-resistant special adhesive for road studs and apply an even layer of adhesive to the bottom of the road stud. Make sure the application is complete to avoid loosening or shifting after sticking.
3. Glue the road stud to the road surface Carefully place the solar road studwith adhesive on the cleaned road surface and press gently to make it fit the ground completely. Please ensure that the light direction of the road stud is correct to avoid installation errors that affect subsequent use. After installation, check the position and angle of each road stud in time to see if they meet the expected design.
4. Road closed for 4-8 hours In order to allow the adhesive to fully cure and ensure that the road studs are firmly installed, the construction section should be closed for 4-8 hours after installation, and vehicles are prohibited from passing. During this period, necessary secondary inspections can be carried out to confirm that all road studs are firmly attached.
The correct installation of solar-powered road studs is the key to ensuring their performance and life. Through the above steps, it can be ensured that the solar road studs are firmly installed on the road and can provide drivers with clear road guidance at night or in low visibility conditions, improving driving safety. It is equally important to choose high-quality solar road stud products and a professional construction team, which will further enhance the overall effect.
