Shenzhen Nokin Traffic Facilities Co., Ltd.

The standard requirements for road studs are divided into 3 categories：
First, construction requirements
Road studs should be made of materials that are sufficiently resistant to chemicals, water and UV rays.
The height and width of the road stud must not exceed 20.3 mm (0.80 in.) and 130 mm (5.1 in.), respectively.
The angle between the front of the road stud and the base shall not be greater than 45°.
The bottom of the road stud should be flat within 1.3 mm (0.05 in. ).
The bottom of the road stud should be substantially matte or a substance that could degrade its adhesion to the adhesive.

Road stud, is used in the road pavement making to guide the vehicles driving on the right roadway and reduce the accidents to keep traffic safe. The road studs are classified by color as follows:
1. White
2. Red
3. Yellow
4. Green

Solar driveway guardrail delineator is a kind of delineator set along the road surface, used at night or in rainy and foggy weather to indicate the direction of the road. It is composed of retroreflective materials, shells, solar panels, LEDs, and control devices. It has active luminescence and passive reflective performance. Guidance facilities, usually used in conjunction with markings.

As a leading supplier of solar road stud lights in China, NOKIN has more than 15 years of experience in production and sales, and began to transform into the high-end solar road stud light in 2016. Buy Nokin solar road stud lights, you will get a high quality supplier.

It is very important to choose a qualified supplier of solar road studs. So how to choose a qualified supplier of solar road studs?
1. Look at the research and development capabilities of solar road studs
2. Visit the solar road studs factory
3. Output of solar road stud suppliers

Road studs are a common traffic roadblock method used to guide people to drive in the right direction, prevent speeding and traffic accidents, and are mainly used in highways.Now, Road stud Manufacturers Take You to Understand the Install Process of Road Studs.

Raised pavement marker, also known as road studs, are installed on the road to mark roadway boundaries, green edges, sub-merges, curves,and etc. According to different needs, it is divided into the following types of raised pavement marker: Single-sided Raised pavement marker, Double-sided Raised pavement marker,ceramic raised pavement marker.

Glass road stud has a 360-degree high-concentration total reflection guide function. Glass road studs can be used in various places such as highways, national and provincial roads, rural roads, mountain roads, urban roads, community passages, and underground parking lots. Glass road stud has good weather resistance, wear resistance, no edges and corners, smooth surface, acid and alkali resistance and oil corrosion resistance, and has a long service life.