thermoplastic road marking machine for sale

NK-CM4 Cold Paint Road Marking Machine (Double Gun)

Hand-push road paint marking machines, with 5.5 HP Honda Engine and Automatic reciprocating reversing plunger pump.Two spray guns.

Power: 5.5HP Honda Engine

Plunger Pump: Automatic reciprocating reversion(two gun)

Worepressure: 8-12Mpa

Width of spray: 100--450 mm

Send Email Chat Now

Share with:

Introduction

Specification

Application

Inquiry

Description:

NOKIN hand-push high-pressure road striping machine is a high-pressure flow type airless sprayer, which uses a gasoline engine to drive a single plunger pump to make the paint become high-pressure in the machine for spraying. The spray gun frame guide rod of the machine adopts a liftable design, which can adjust the spraying speed and spraying width accurately and conveniently, with stable performance and excellent quality. The marking lines are uniform in thickness, with neat edges and corners, with low labor intensity and quick and convenient construction.

Main purpose: NOKIN hand-push type high-pressure road marking paint machine is a special equipment for normal temperature marking construction. Cold spray road marking paint machine is mainly suitable for roads, parking lots, airports, gas stations, company factories, etc., as well as painting straight lines, dotted lines, curves, zebra crossings, text, arrows, graphic signs, etc.

NK-CM4 Cold Paint Road Marking Machine (Double Gun)

Characteristic:

--Brand engine, strong power, stable work.

--Tires of road marking paint machine provide straighter lines when striping on both smooth and uneven surfaces.

--Road striping machine with hand-held spray: In addition to allowing you to freely use the template to paint various symbols, using the hand-held spray can also work on walls, columns and other places other than the ground.

--Color changes and cleanup are very simple.

-- Curve work. Some road paint marking machines also install an extra wheel at the rear, which allows you to work freely along the curved markings.

Specification :

Power:	5.5HP Honda Engine
Plunger Pump:	Automatic reciprocating reversion(two gun)
Spray Gun Quantity :	Two Guns
Operation Mode:	Hydraulic drive
Work-pressure:	8-12Mpa
Flow of Spray:	8L/min
Width of Spray:	100-450mm(two gun)
Thickness of Spray:	0.2-0.4mm
Dimension:	16008001200mm
Weight:	120kg
Paint Tube Length:	10M

Operation method of Cold Paint Road Marking Machine:

1. Add oil and gasoline before starting the engine (half of the oil dipstick can be added)
2. Adjust the nozzle to the height required for marking before starting the machine.
3. Turn the engine switch to the ON indication, and start the engine by hand.
4. When a bucket of water is filled, first test the machine to test the pressure, put the pipe in the bucket, open the red valve, wait for the gas in the thick pipe to be completely drained, close the red exhaust, and wait for the pressure to increase (check the pressure gauge indication).
5. After about 3-5 minutes, when the pressure on the pressure gauge reaches 200, press the discharge valve twice with the right hand to reduce the pressure, or manually adjust the pressure reducing valve, and then adjust the pressure to 120 and work normally.
6. Mix and stir evenly with water-based scribing paint + thinner when scribing normally.
7. After the work is completed, first stop the machine to relieve pressure, replace with thinner or water, and repeat the previous steps to rinse the machine until it is clean.

Send Your Inquiry

Please feel free to submit your inquiry information to us. We will contact with you as soon as possible.