Aluminum Round Solar Road Stud For Motorway

We offer our clients a broad assortment of Solar Road Studs. Harnessing energy from the sun during the day, the Solar Road Stud charges during the daylight to light up and shine brightly during the night- time for miles and miles in front of drivers. Customized road studs in various colors are manufactured as per clients’ requirements. Due to the high visibility of the Solar Road Studs, the threat of accidents can be evaded.

Share:
Content

Installation Method Of Raised Solar Road Stud:

Carefully mark the distance between the placement of solar road stud lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 35mm and the depth will be 55mm.
Remove all debris from the installation hole.
Pour epoxy into the holes per the manufacturer’s instruction.
Verify that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the solar-led road stud shaft.
Set the lighting surface of the solar road stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft. Verify the bottom of the solar road marker is firmly installed on the installation surface allowing for zero surface float; to occur. (space between installation surface and bottom of the solar marker).
After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility.
The recommended spacing between each solar road stud is as follows:
Highways and Expressways
7 – 8 yards (5 – 6 meters)
Dangerous Entrances and Exits
4 – 5 yards (2 – 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.
0.5 – 3 yards (0.5 – 2 meters)
The spacing between each solar stud is also according to your actual application requirements, the above values are for reference only.
Aluminum Round Solar Road Stud For Motorway
Aluminum Round Solar Road Stud For Motorway

SPECIFICATION:

Body material : Aluminum Alloy+PC cover
Power supply: Solar panel(Monocrystalline 5V /80MA)
Battery: Lithium battery 1000MAH*3.2V
LED: Ultra bright diameter 5mm*6PCS
LED Color: White Green Red Yellow Blue
Flashing model:  flashing  or constant
Working hours: 140 hrs for flashing modes,40hrs for constant modes
Visual distance: 1000m(approx)
Waterproof: IP68
Load Capacity >30T(can be installed in the middle of  the road)
Size: φ123*45mm  (φ4.84″*1.77″)
Package:  1pcs/box; 30pcs/ctn; Weight: 30kgs; Carton size: 67.5*28*20cm

(1pcs/box; 30pcs/ctn; Weight: 66.14bs; Carton size: 26.57″*11.02″*7.87″)

Life span:  more than 5 years
Working Temperature -20 °C~ + 70°C
waterproof IP68
Aluminum Round Solar Road Stud For Motorway
Aluminum Round Solar Road Stud For Motorway

We offer our clients a broad assortment of Solar Road Studs. Harnessing energy from the sun during the day, the Solar Road Stud charges during the daylight to light up and shine brightly during the night- time for miles and miles in front of drivers. Customized road studs in various colors are manufactured as per clients’ requirements. Due to the high visibility of the Solar Road Studs, the threat of accidents can be evaded.

Inquiry
* Name:
* Email:
Country:
Tel/Whatsapp:
* Message:
More