Aluminum Solar Cat Eyes Yellow Road Pavement Markers

Solar road studs are improved and innovated on the basis of traditional cat-eye reflective road signs, mainly to develop the field of road traffic safety, with the purpose of improving road safety and reducing the probability of traffic accidents. At the same time, it can also be used in other fields, such as courtyard decorative lighting, square landscape lighting, etc.

Share:
Content

Installation Method Of Raised Solar Road Stud:

Carefully mark the distance between the placement of solar road stud lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 35mm and the depth will be 55mm.
Remove all debris from the installation hole.
Pour epoxy into the holes per the manufacturer’s instruction.
Verify that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the solar-led road stud shaft.
Set the lighting surface of the solar road stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft. Verify the bottom of the solar road marker is firmly installed on the installation surface allowing for zero surface float; to occur. (space between installation surface and bottom of the solar marker).
After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility.
The recommended spacing between each solar road stud is as follows:
Highways and Expressways
7 – 8 yards (5 – 6 meters)
Dangerous Entrances and Exits
4 – 5 yards (2 – 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.
0.5 – 3 yards (0.5 – 2 meters)
The spacing between each solar stud is also according to your actual application requirements, the above values are for reference only.
Aluminum Solar Cat Eyes Yellow Road Pavement Markers
Aluminum Solar Cat Eyes Yellow Road Pavement Markers

Advantages of Solar Road Studs Products:

♦ Visible up to 800 meters
♦ Reduces Accidents by up to 80%
♦ Increases driver reaction
♦ Illuminates effectively in wet road conditions where traditional striping fails
♦ Eliminate Light pollution
♦ Low-cost alternative to overhead lighting
♦ Recyclable
♦ Biker friendly
♦ Flush In-road Installation (2.5mm above the road)
♦ Suitable for snow plowing
♦ Up to 400h endurance (with full accumulator)
♦ Uni / Bi-Directional LED
♦ Maintenance free
♦ Easy installation, wireless free
♦ Autonomous solar energy
Aluminum Solar Cat Eyes Yellow Road Pavement Markers
Aluminum Solar Cat Eyes Yellow Road Pavement Markers

Application

Solar road studs are improved and innovated on the basis of traditional cat-eye reflective road signs, mainly to develop the field of road traffic safety, with the purpose of improving road safety and reducing the probability of traffic accidents. At the same time, it can also be used in other fields, such as courtyard decorative lighting, square landscape lighting, etc.
Highways: Road studs are used on highways and roads without street lights on-road sections without isolation belts and insufficient night light.
Landscape lighting: Led solar road studs can also be used as marker light for park paths and decks of boats or bridges.
Crosswalks: Solar-powered road stud work for urban sidewalks, crosswalks(pedestrian crossings)roundabouts, and traffic islands.
Entrance of roads: Solar reflective road studs can be used for high-speed toll entrances to guide vehicles in and out.
Inquiry
* Name:
* Email:
Country:
Tel/Whatsapp:
* Message:
More