energy-saving LED solar road studs
Our LED Solar Powered Road Studs are rated as IP68. They are fully dust-tight and protected from long-term immersion in water. They can withstand up to a specified pressure, and they have limited ingress protection. These lights also come in different colors such as red, green, yellow, white, and blue. These pieces of lighting equipment signify our commitment to providing quality products to each and every household or business in the Philippines. We continually strive to provide easy access to energy-efficient and environmentally friendly lighting alternatives that are set at reasonably low and affordable prices.
Send Inquiry
Quote Online
Share:
Content
Solar Road Stud model NK-RS-Q7 is suitable for low and medium-speed road warning lanes, Depending on the actual road conditions, you can select a continuous product, single or multiple products, combined to install them on the road pavement either on one or both sides.
At night, its signaling function provides drivers of motor vehicles with orientation instructions, as well as drivers of non-motorized vehicles and pedestrians. In this way, it greatly improves road safety at night.
Installation:
1. Before installation, solar road studs shall be charged under sunlight for 1 hr, to check the studs can work normally.
2. Placing security isolation facilities for installation work is most important and must not be ignored. In the whole process of dynamic construction, no matter whether on a newly closed road or a running road, every installer shall be in the isolation area. If on a running road, the ratio between security personnel and the installing personnel shall be 1:1; If on a closed road, 1:3.
3. Locate the installing position and ensure it is flat. For curving, cracked, or uneven pavement, straighten it prior to installation.
4. Clean the installation location with a brush, meanwhile ensuring the location is dry.
5. Glue the road stud thoroughly with the proper amount of epoxy glue.
6. Firmly mount the stud on the fixing location & ensure the reflective part is facing the right traffic direction. Do clean the spilled epoxy glue if an excessive amount is used.
7. Inspect the installed studs within 2hrs after installation, ensuring that all the studs are fixed in the correct direction or not crooked.
8. Remove the isolation facilities in 4hrs after the stud’s installing glue is thoroughly cured.
NOKIN offers high-quality LED Solar Powered Road Studs, also known as Road Reflectors. These products are designed to guide vehicles and pedestrians for directions.
The road reflectors we offer are powered by solar energy, making them more environmentally friendly. Because of their light-feeling function, they automatically light up and help guide people on their way.
Our LED Solar Powered Road Studs are rated as IP68. They are fully dust-tight and protected from long-term immersion in water. They can withstand up to a specified pressure, and they have limited ingress protection. These lights also come in different colors such as red, green, yellow, white, and blue.
These pieces of lighting equipment signify our commitment to providing quality products to each and every household or business in the Philippines. We continually strive to provide easy access to energy-efficient and environmentally friendly lighting alternatives that are set at reasonably low and affordable prices.
If you need product recommendations or design inspiration for your projects, you may check out our Completed Lighting Project page for ideas.
For inquiries regarding our products and services, you may also send us an e-mail or contact us through our mobile numbers.
Inquiry
More