High load capacity LED solar road stud

As a new generation product, solar road stud has many advantages, including high brightness, active emission, and so on. Many kinds of high-quality products are produced for the consumers to satisfy their unique needs, and some well-known products have competitiveness in the global market. 

Share:
Content

Solar road studs can be used on ordinary roads, country roads, and expressways. It plays an important role in protecting the safety of drivers and reduces traffic accidents caused by weather and personal reasons. Nowadays it has been widely used all over the world. As a new generation product, solar road stud has many advantages, including high brightness, active emission, and so on. Many kinds of high-quality products are produced for the consumers to satisfy their unique needs, and some well-known products have competitiveness in the global market.

High Load Capacity LED Solar Road Stud
High Load Capacity LED Solar Road Stud
Installation Method Of Raised Solar Road Stud:
Carefully mark the distance between the placement of solar road stud lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 35mm and the depth will be 55mm.
Remove all debris from the installation hole.
Pour epoxy into the holes per the manufacturer’s instruction.
Verify that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the solar-led road stud shaft.
Set the lighting surface of the solar road stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft. Verify the bottom of the solar road marker is firmly installed on the installation surface allowing for zero surface float; to occur. (space between installation surface and bottom of the solar marker).
After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility.
The recommended spacing between each solar road stud is as follows:
Highways and Expressways
7 – 8 yards (5 – 6 meters)
Dangerous Entrances and Exits
4 – 5 yards (2 – 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.
0.5 – 3 yards (0.5 – 2 meters)
The spacing between each solar stud is also according to your actual application requirements, the above values are for reference only.
Inquiry
* Name:
* Email:
Country:
Tel/Whatsapp:
* Message:
More