How to install Solar road stud

NOKIN is engaged in manufacturing, exporting, and supplying of solar road studs. This road safety product is manufactured by our expert professionals. These products are available in different colors and sizes. It provides clear visible traffic guidance to people in all weather conditions.

Share:
Content

Product Description
Solar Road Studs use integrated solar panels which power the battery and LED lamp without any external power supply.
NOKIN is engaged in manufacturing, exporting, and supplying of solar road studs. This road safety product is manufactured by our expert professionals. These products are available in different colors and sizes. It provides clear visible traffic guidance to people in all weather conditions. These road studs are starts flashing lights automatically at the time of dawn or at the time of inclement weather. It can be safely used and is easy to install. We take bulk orders from clients.
How to install Solar road stud
How to install Solar road stud
Installation Method Of Raised Solar Road Stud:
Carefully mark the distance between the placement of solar road stud lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 35mm and the depth will be 55mm.
Remove all debris from the installation hole.
Pour epoxy into the holes per the manufacturer’s instruction.
Verify that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the solar-led road stud shaft.
Set the lighting surface of the solar road stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft. Verify the bottom of the solar road marker is firmly installed on the installation surface allowing for zero surface float; to occur. (space between installation surface and bottom of the solar marker).
After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility.
The recommended spacing between each solar road stud is as follows:
Highways and Expressways
7 – 8 yards (5 – 6 meters)
Dangerous Entrances and Exits
4 – 5 yards (2 – 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.
0.5 – 3 yards (0.5 – 2 meters)
The spacing between each solar stud is also according to your actual application requirements, the above values are for reference only.
Inquiry
* Name:
* Email:
Country:
Tel/Whatsapp:
* Message:
More