In-Road Warning Light Systems

Solar road studs in Intelligent Pedestrian System Using for sidewalks, warning drivers and pedestrians, to ensure the crosswalk traffic safety, Solar road studs Can be combined with traffic lights, indicating the state of road traffic, traffic lights to reduce the intersection of the dead, NOKIN solar road stud X5 Coordinating with thermal imaging detectors, geomagnetic sensor, installed in the crosswalk or accident-prone area, automatic work to increase road safety. Embedded design makes solar road stud X5 400KN compression, can be installed in the sidewalk zebra, road centerline.

In-road warning lights (IRWLs) are embedded in the pavement to clearly outline a crosswalk and rapidly flash in unison to alert distracted drivers that pedestrians are actively crossing. In-Road Warning Light Systems are ideally suited for mid-block crosswalks, school zones, high volume crosswalks, and high speed roadways. Crosswalk lighting systems doubled rates of drivers yielding to pedestrians at crosswalks.

When led road studs and intelligent transportation systems are combined, they have different effects. Intelligent transportation systems are a combination of leading-edge information and communication technologies used in transportation and traffic management systems to improve the safety, efficiency, and sustainability of transportation networks, to reduce traffic congestion and to enhance drivers’ experiences. The possibilities are endless.

After Smart Pedestrian Crosswalk System is activated, the daytime visible road stud light beads and day&night mode luminous traffic signs direct the driver’s perspective to warn the driver that there are or will be pedestrians passing the crosswalk, please slow down and give way.
The road stud light board directs pedestrian perspective and warns the pedestrian that you are or will pass the crosswalk, please be careful. Driver-pedestrian warning at the same time to effectively ensure the safety of pedestrian crossing.

The NOKIN Pedestrian Crosswalk Warning Light Systems can be widely recognized by the masses which is inseparable from our company’s serious attitude. We have always been based on safety, intelligence, and innovation, with “warning” as the core, and “letting traffic hazards be seen” as the guide, deeply researched and developed the intelligent pre-warning system, which aims to effectively transmit each warning signal, effectively solve traffic problems, and protect both drivers and pedestrians’ safety.

Smart Crosswalks System aims to prevent traffic accidents by effectively warning drivers at pedestrian crossings. When the button on it is pressed, the warning system activates and the LED warning light flashes to encourage drivers to be careful. In this way, pedestrians can safely cross the street. This special system runs entirely on solar energy.

The main objective of the Intelligent Pedestrian System is to increase traffic safety for pedestrians in busy areas. Some led road stud lights are installed next to pedestrian crossings, making them more visible to drivers and let drivers know that there are people crossing or who intend to cross them.

At NOKIN, we achieve this by enabling additional perception for the vehicles through road side sensors, for example by using our Smart Pedestrian Crosswalk to see behind corners and detect road users well in advance. The Smart Pedestrian Crosswalk supports V2X (infrastructure-to-vehicle) communication enabling automatic communication between all communication-ready traffic entities.

Intelligent pedestrian crosswalk system is a multifunctional C-ITS device, which improves traffic safety on unregulated pedestrian crosswalks. The design of the device is intended to comply with all requirements concerning roadside C-ITS applications. The main task of the Intelligent pedestrian crosswalk system is to improve the awareness of road users located nearby and to notify road users of the probable traffic hazard. The system is adaptive so it reacts accordingly to the situation. Hardware is meant to be modular and can be retrofitted on the existing infrastructure.