led solar road stud

In general, while solar road studs bring us convenience, we must also pay attention to details such as the installation of solar road studs. These details play a very important role in the quality and use time of solar road studs.

Solar road maker is a new type of transportation facility that can be used at night or in rainy and foggy weather.It can well indicate the direction of the road for drivers and reduce the occurrence of traffic accidents.Solar studs application range is very wide.

If you are looking for low cost, quick- to-install lighting solutions to decorate your garden pathways and driveways, NOKIN Solar LED Road Stud is the safest best. Read further to know how it becomes a better option.

Casting Aluminum Road Stud Light Outdoor Solar Powered Lamp for Pathway Road, This road stud light is designed to guide vehicles and pedestrians in the right direction. Solar power, environmentally friendly. Solar Stud is recharged by solar panels under sunlight, automatic charging during the day.

Solar road studs are charged in the Daytime, it will automatically light at night, solar road stud is used in the side of the road, village, Park, Garden, or seaport. Two work modes and 5 colors for your choice. Your own design is appreciated; NOKIN can make the approval sample according to your golden sample.

At the airport, brightly lit solar road studs are installed around the runway to guide aircraft during take-off and landing. This led solar road stud lighting does not to illuminate the runway or the airport. Instead, these solar road studs mark the dimensions of the runway (length and width). Thus, at night and in other low-visibility conditions, pilots have a good reference point between the aircraft position and the runway.

One of our American customer installed the solar road stud marker as solar dock lights on the dock. Solar road stud does not require the installation of expensive cables. It only needs to be glued in the required position. No maintenance is required. These solar road studs markers will be charged by the sun naturally, once it gets dark, the LED light in the solar stud will automatically light up every night for up to 10 hours. This solar dock light is also very suitable for the dock of the playground.

When night falls, it is not just a high-hanging street lamp that can bring a brightening effect to the city. The emergence of solar road studs that flash and blink can not only add light to the road section but more importantly, solar road studs can isolate the road surface. Standardize the role of drivers at night.

This Solar Deck light is a solar LED cats’ eyes alternative. This solar deck light can be used to light pathways, schools, cycle paths or for more general route marking and way-finding.

These blinking solar road studs are designed to guide vehicles and pedestrians in the right direction. Solar powered and environmentally friendly. Solar studs Charges automatically during the day through solar panels under solar lights. Durable PC material can handle the outside environment and is rugged and waterproof. Visible distance up to 800 meters, blinking solar studs can effectively provide drivers with safe direction of travel. Simple design matches a variety of landscapes and styles, perfect for illuminating roads, driveways, sidewalks and more.

NOKIN Solar Road Stud can help reduce regional railroad crossings, intersections and directions as well as alert drivers in dark and inclement weather conditions. The solar studs helps reduce environmental impact and saves costs. With over 18 years of manufacturing experience, NOKIN solar road studs offer competitive pricing on aluminum road markers and a wider selection for the global road safety market and reliable partners around the world.

Solar stud lights provide a reliable solution through innovative solar energy. Smart solar stud light can help reduce accidents at regional railroad crossings, intersections and directions as well as during driver alerts at night and in inclement weather. This NK-RS-K1 solar stud light load capacity: >20T.Can be installed in roadsiede, pathway, dock, deck, garden,parks and roundabouts.

These solar-powered LED road studs are naturally solar-powered. The LED lights in the solar studs automatically come on each night as soon as it starts to get dark, and they are designed for road safety to help prevent serious accidents and to emit rather than reflect light. Solar studs are also known as solar road markers, reflective strip markers and solar signaling devices.

Solar Stud Light Automatically starts working at nightfall or in bad weather. Power saving. UV-free and environmentally friendly. This Solar Stud Light is naturally charged by the sun. Batteries may be out of stock for long term storage and are not malfunctioning, please place in sunlight to charge when in use.
Scene Application: This Solar Stud Light is perfect for lighting sidewalks, decks, docks, boats, driveways, stairs, walkways.

NOKIN round Solar road stud, made of PC material, fixed on the floor with two screws, filled with glue in the middle, used for auto-ignition photoelectric tube, 3 LEDs on each side arranged in front of the selected color, one with micro-processing Microcontrollers (integrated electronic devices) and different digital and analog inputs and outputs. The solar panels of solar road stud work in different ways according to the selected program. NOKIN provides two working modes, blinking and constent, and can generate other designs tailored to your needs.

This solar road pavement markers are designed to guide vehicles and pedestrians in the right direction. Powered by solar energy, solar road pavement markers is more environmentally friendly and has a light-sensing function that automatically lights up when it gets dark. By focusing on this light, people will be safer on the road.

Solar road studs are easy to use – safety and convenience are combined with this solar stud. Safe enough to handle any road, this solar road stud can be installed quickly and never needs to be touched again. Solar LED Road Studs are also known as solar powered sidewalk studs, solar pavement markers and solar powered warning devices.

LED solar studs are one of the most important items in the world today. Resource depletion has put solar lighting front and center in the energy industry. The LED flashing solar stud Light uses a fraction of the power of an incandescent bulb and is a fraction of its size. This flashing solar stud has 6 LEDs that provide ultra-bright light.

Solar Cat Eyes For Highway purpose is to divide the land horizontally. For example, roundabouts, curved roads, hand separators, parking lots, vehicle entry/exit, etc. Due to the high-strength ABS material structure, This Plastic Solar Cat Eyes can withstand a static load of 20 tons. In addition to the lighting provided by 6 LEDs, it also has a reflective reflector due to the role of the car lights.

The solar panels of NOKIN Solar Road Studs use monocrystalline silicon. Monocrystalline silicon is a relatively active non-metallic element. In addition to its general characteristics, it also has the advantages of good purity and high solar conversion rate. The high-precision cast aluminum mold makes the solar road studs high strength, impact resistance, oxidation resistance, corrosion resistance, sturdiness and durability, stability, and reliability.

Solar Raised Pavement Marker ensure your employees, visitors, contractors and members of the public safe in your workplace or near public access. Smart, safe, and sustainable surface mounted Solar Raised Pavement Marker improve night visibility and provide clearly visible traffic guidance in all weather conditions. Continuous glow for 50 hours, visibility of 800 m, color: red, white, yellow, green, blue.

The NOKIN Aluminum Solar Road Marker is visible in night and rainy conditions. Tough, impact resistant housing and wear resistant reflectors ensure lasting performance and durability. NOKIN specializes in providing solar road stud markers, which are LED scintillation equipment for roads that provide direction indication, improve road safety and reduce accidents.

After the Solar Road Stud Light installation, with a knife to scrape clean the spill glue , clean up.after the installation of Solar Road Stud Light, then linked to the pre-arranged main line, connect the power supply to test whether there is a short circuit,if no problem can be connected to the main power.

How to install Solar Road Pavement Markers? use epoxy. The ratio of epoxy glue A and B 1: 0.7, and then add 15% -30% of cement as a filler (not to stir a lot of glue, enough to stick 50-70 PCS Solar Road Pavement Markers for one staff). Colloid to stir, (electric drill with a mixer) the same color. Each Wired Solar Road Pavement Markers requires about 30-40 grams of glue.

Technical Sheet of WiredSolar Raised Pavement Marker. when install the Solar Raised Pavement Marker or wired road stud. Do not touch the LED Light near the hand, avoid make glue to the shell, affecting the luminous effect! Water, damp, oil are Prohibited to install Wired Road Stud (easy to fall off). Remove the road cone after 4 hours of installation.

NOKIN aluminum solar road stud A6-1 with 30ton compression resistance. Larger solar charging area. Anti-impact and IP68 design for reflector. Before installation, solar road studs shall be charged under sunlight for 1 hr, to check the solar road studs can work normally. Small and economy aluminum model, with two shanks, without releasing on road. aluminium alloy+Polycarbonate+epoxy fille

NOKIN Aluminum Solar Raised Pavement Marker Installation Steps. Firstly, the ruler should be used to determine the installation position. The height should be in accordance with the design of the drawing to ensure that the vertical direction is in a straight line and the horizontal alignment is right and left.

High quality Aluminum Solar Cat Eyes application at Road side, motorway, deck light, yard, packing lot, garden, ect. Aluminum Solar Cat Eyes size is L125mm*W107mm*H26+50mm. all NOKIN solar cat eye road stud with CE;ROHS;IP68;SGS Certificate. Warranty is 1 year. Life span is 3years for NI-MH battery.This solar cat eye A6-1 Load capacity is more than 30 tons, can be installed in the middle of the road.

NOKIN Solar road markers with spike is good quality and hot sale in the whole world. Working hours for blinking is 140hours for NI-MH battery, 130hours for lithum battery, 30hours for super capacitor after fully charged. Constant:40hours for NI-MH battery; 35hours for lithum battery; 15hours for super capacitor after fully charged.Working model is blinking or constant(charged at daytime, working automatically at night). NOKIN Solar road markers can work whole night in the dark places

NOKIN Solar road marker working temperature is -20¡ãC-80¡ãC. Life time is over 5years. Resistance is 300KN. Size is L125mm*W107mm*H26+50mm with shank or without shank, Water proof is IP68. warm white is hot sale in the world. load capacity is over 30 tons, Solar road marker can be installed at the parking lot, few cars can pass throught.

Solar Road Pavement Markers are flashing solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and centrelines. Embedded in the road surface, Solar Road Pavement Markers are an electronic improvement on the traditional cat’s eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intense brightness of the LEDs makes them easily visible at distances of about 900 m under favourable conditions.

Solar road studs are more visible from the front road layout than forward reflective road nails. All night, reliable all year, a longer service life than traditional road stud, easy operation, and excellent vision even in harsh weather conditions. On wet roads, solar road studs can reduce nighttime traffic accidents by more than 70 percent, enhance the driving experience, and make drivers feel safer and better able to travel at night.

The surface of the installation location of Solar LED Road Stud Light to be cleaned, with a blade about 30-40 grams of glue, smear on the back of the Solar LED Road Stud Light, firstly take the Solar LED Road Stud Light through the cable channel cable trench wall (pre-drilled trunking), set to be good Position, fitted with self-tapping, with a Phillips screwdriver on both sides can be tightened at the same time.

NOKIN Solar Road Pavement Markers A6-1 Material is Aluminum+PC. Power supply is Monocrystalline solar panel 2.5V/120MA for NI-MH. Battery is NI-MH 1.2V/ 600mah(high temperature resistance); Lens is PC. Solar Road Pavement Markers LED IS Ultra bright diameter 5mm(6pcs). LED color is Red,Yellow,Green,Blue,White. Working model is Blinking or constant(charged at daytime, working automatically at night). Working hours is (1).Blinking: 140hours; Constant: 40hours for NI-MH battery. Visual distance is over 800m. Water proof is IP68. Resistance is 30T.

These LED solar road markers are powered by solar captured with built – in solar panels from natural sunlight and stored in internal cells of the solar road markers. The result of this active light output is that they provide 10 times forward road layout visibility compared to traditional regression reflective road markers, giving driver visibility up to 900m.

Originally designed for road use, its low profile makes NOKIN Solar Studs Light very suitable for various other applications such as sidewalks and bicycle lanes, crosswalk, level crossings and railway platforms. Below on the NOKIN Solar Studs Light specification sheet for more details.

Under harsh conditions (rainy days, foggy days or surface spray), traditional reflective road studs and road markings are not noticeable, but NOKIN solar road studs lights continue to shine brightly and safely guide you. This provides ample time to obtain and process information about the possible dangers ahead, and to adjust the driving mode accordingly without applying the brakes.

Aluminum Solar Cat Eyes have been widely used worldwide for edge demarcation and have been shown to reduce nighttime road accidents at the UK installation sites by more than 70 percent. Aluminum Solar Cat Eyes are perfect for where profile enhancement is required, but may not be flush.

Solar road stud lights have been fully approved by transport uk. Please refer to our installation instructions for step-by-step guidance on how to install solar road stud lights. With just a few hours of charging, the solar road stud lights can provide enough battery power to keep it running on the last day – enough to ensure that the road stud is up and running all year round, regardless of the weather or anywhere in the world.

The NOKIN active solar road markers do not have the same dependence. Solar road markers do not rely on the vehicle headlights at all. Instead, they actively deliver light output from the high brightness LED in the stud directly into the driver’s natural sight.

NOKIN solar road studs are more robust than conventional road studs, meaning solar road stud have lower total life costs and longer service life than reflective road studs.

Solar Road stud have proved to play a great role in road safety, reducing nighttime road accidents by more than 70% and treating us as reality. reflective drivers at 100 km / h distance 90m. This provides about 3.2 seconds to respond to changes in the road in front. Active solar road stud provide up to 900m views and the driver receives more than 30 seconds.