solar road studs philippines

This is the updated A10 solar road stud from NOKIN to the Philippines market, the Dia is 133mm and the material is aluminum alloy, the solar road stud is well above the road surface and uses a number of well known and widely accepted colors, with lights in particular orientations to make the message to a driver clear and univocal thereby improving the outturn of the road while enhancing safety aspects.

Aluminum Solar Road Stud Can withstand large impact and can resist corrosion for a long time. 20 tons of pressure resistance. Curves smooth without sharp edges are better cushioned by the tire’s compressor. The waterproof grade of Solar Road Stud can reach the industry standard IP68. It can be very effective in keeping water out. Low power consumption, long working hours, and easy installation are the main selling points. Solar Road Studs can be used for more than 60 hours after being fully charged. The normal life cycle lasts 3-5 years. It has been widely used in different road conditions, such as dim sunshine, rainy days, and heavy trucks.

Solar Pavement Leveled Marker automatically open and close — at dusk, the devices open, during the day, they close… Solar Pavement Leveled Markers are designed to handle enormous weight pressures and extremely hot and cold conditions. Solar Pavement Leveled Marker is easy to install and does not require any maintenance or electrical installation. These devices operate at very low voltages and are sealed so they are safe for the public and installers.

This two-sided solar road stud pavement marker combines autonomous and powerful light sources with traditional reflectivity to provide unparalleled visibility and greatly improve road safety. solar road stud pavement markers have sturdy aluminum housing and IP68 levels of water resistance to rainy outdoors.

Even in harsh conditions where traditional reflective nails and road markings are less noticeable (rain, fog, or surface spray), NOKIN Blinking Solar Stud Light continue to glow to keep you safe.NOKIN Blinking Solar Stud Light are more robust than conventional road nails, which means that their overall life cycle costs are lower and last longer than reflective road stud.

NOKIN Solar Stud Light include a light-emitting diode (LED) that automatically lights up in dark hours to provide visibility of up to 900m. Solar Stud Light give cyclists and other users a clear view of the path ahead, providing them with greater safety and security.

The brightly lit solar road studs mean cyclists and walkers can identify their route within 900 metres of nightfall. This ensures that road users are more aware of any hazards they may face, such as kerbs, passageways, intersections with roads, river and canal sides, surface fluctuations and other hazards in urban or rural areas.

Although originally designed for road use, the low profile of the solar Road Studs of NOKIN Traffic makes them ideal for a variety of add-on applications such as sidewalks and bike lanes, pedestrian crossings, level crossings and rail platforms.

NOKIN Solar stud light features: Surface-mounted solar Road Stud light provides up to 900m visibility with high-strength LEDs and free solar energy with built-in solar panels
Collected and stored in electronic devices designed to maintain light output throughout the annual cycle.
Solar road stud light can be used where street lighting is not available, is not cost-effective, or is not environmentally feasible.

NOKIN Solar Embedded Solar Stud Light: Smart, safe and sustainable options for providing greater safety, guidance and hazard warnings on bike lanes, sidewalks and rail platforms in dark hours. Solar road studs lights reduce environmental impact and save costs.

Solar Road Stud can effectively save costs and bring objective economic benefits, and reflective surface mount studs is a false economy. Relying solely on the effectiveness of the vehicle headlight beam and the product’s ability to reflect some light back into the driver’s line of sight means that they typically provide only approximately 90m of visibility. A single Solar Road Stud can provide a visual distance of 900 meters.

NOKIN Aluminum Solar Stud Light combine reflective strips with built-in high-strength LEDs and utilize free solar power to create a solution that increases visibility of the road layout ahead by up to 900 meters. This increases the time available to determine the road ahead and allows you to adjust your behavior to the driving conditions ahead. Solar Stud Light continues to glow to keep you safe, even when other road markings become less visible in bad weather conditions.

Blinking Solar Studs can help reduce accidents at regional rail intersections and intersections, and provide drivers with guidance and hazard warnings in dark and severe weather. Aluminum solar road stud help reduce environmental impact and save costs. With more than 15 years of factory experience, NOKIN produces solar road stud with competitive aluminum solar stud prices, providing more choices for the global traffic road safety market and trusted partners around the world.

Nokin is a manufacturer of a wide range of solar road studs, including waterproof IP 68 solar LED road studs, warning lane markings, long service life and customizable colors. Solar road stud reflector solar panel LED, LED reflector, aluminum solar road stud and etc.

Features of Solar Road Stud:
1) Apply to the edge lines of roads and sidewalks
2) Use for more than 180 hours on foggy or rainy days after full charge.
3) NOKIN Solar Road Stud Can work normally for more than 3 years
4) Energy saving and environmental protection
5) Secure the appliance with epoxy glue or screws
6) Can carry 20 tons
7) Waterproof and unbreakable: solar panels, electronics and optics are installed inside

Aluminum underground Solar Road Studs are fixed to the road with epoxy glue. Each side is equipped with 3 flashing white LED lights. Fully charged aluminum Underground Solar Road Stud have more than 72 hours of battery life (fully charged after 8 hours in daylight).

Name:Aluminium Solar Road Stud
Solar Panel :2.5V/100MA Monocrystalline
Storage: 1.2V/600MAH Hi-temperature Ni-mh Battery
Lighting Time: 100h after fully charged
Work Mode: Flashed for 90times per minute or Stable
LED Color: Red,Yellow,Blue,Green,White
LED Qty: 6PCS Diameter 5mm High Brightness Epistar LED

Aluminum solar stud light with high-strength aluminum housing, with excellent pressure strength and scratch-resistant ability. With high-light LEDs, warning lights of aluminum solar stud light can be seen 800 meters away to alert the driver to the road conditions ahead.