solar stud price

Our company is engaged in manufacturing, exporting and supplying of solar road studs. This road safety product is manufactured by our expert professionals. These products are available in different colors and sizes. It provides clear visible traffic guidance to people in all weather conditions. These road studs are starts flashing lights automatically at the time of dawn or at the time of inclement weather. It can be safely used and is easy to install. We take bulk orders from the clients .

Installation Method Of The Road Stud
Separation facilities play key role in the installation process. No matter in any conditions, all the workers should be inside the separation facilities. In the road studs are installed in the service roads, the quantity of security officers should be equal to that of the installation workers; if they are installed in un-service roads, the quantity of the installation workers should be three times of that of the security officers.
Make sure that the installation site is even, and if there is an expansion joint or uneven place on the road surface, we should level the ground first.
Use the brush to clean the installation site, and make sure that the places is dry enough.
Smash enough glue on the road stud.

Road studs serve various purposes on the UK road network from assisting people who are visually impaired. Helping them when crossing the road, to keeping drivers on the correct side of the carriageway in poorly lit areas. There are two main types of road studs available, reflective and non-reflective.

Solar road studs are designed for decoration and lighting. It charges automatically during the day and lights up after dark. Using die-casting aluminum shell, reflective film, PC material top cover, this lamp is IP68 waterproof, anti-ultraviolet, anti-yellowing. It can withstand up to 20T/44000LBS pressure, which means it will not be damaged even if a car or luggage runs over it. With 6 5mm super bright LEDs, this light is visible even from a distance of over 800 yards. This solar base light can work for 40 hours per day at standard intensity on a charge and 72+ hours on a full charge.

Solar studs are now widely used for controlling traffic flow with a wide number of applications. In practice, such systems operate well above the road surface with a number of well known and widely accepted colors, with lights in particular orientations to make the message to a driver clear and univocal, thereby improving the traffic flow of the road and enhancing safety aspects. The new designed and patent solar stud could stand the pressure of 30 Tons so that cars can drive on the solar led marker lights directly.

The reflector of raised solar stud A6-1 is embedded from the inner side. The reflector embedded from the inner side, which is lower than the surrounding aluminum and not easily be damaged, reflective sheet inside coated with a layer of film to avoid eroding reflectors. The lifespan of reflectors is extending effectively.

NOKIN Bi-Directional Pavement Levelled Stud provides excellent visibility for longer distance and also support wireless control system solution for applications like changeable lanes, crosswalk, and many more various areas that need specific management.

Solar road stud is a product with high visibility that operates without electricity infrastructure in order to create a safe traffic environment. NOKIN aluminum flashing solar road studs have many types and all have 5 colors, white, red, blue, yellow, and green. The solar road studs in the pictures are made of aluminum alloy and high durability polycarbonate material.

Solar LED road studs are the consummation of years of cross networking by researchers, officials, and designers. SRS, as they have come to be called, utilize the solar rays absorbed in the daylight hours, via exterior solar cells, to convert a mere two or three hours’ worth of sunlight into a staggering eight to ten days worth of illumination capability when fully charged.

Solar road stud lights rely on their own light, which is very eye-catching at night, allowing drivers to easily find the demarcation line on the road they are driving, and can brighten the road. Nokin’s solar road studs are very popular in the Philippines and can be used in the center of roads and zebra crossings.

This flashing solar stud is designed to guide vehicles and pedestrians in the right direction. Powered by solar energy, Solar Stud Light is more environmentally friendly and with light sensing function, Solar Stud Light will automatically light up when it gets dark. By focusing on this light, people will be safer on the way.

The Blinking Solar Stud Light is one of the most important items in the world today. Depleted resources have put solar lighting at the front and center of the energy industry. The LED indicator uses a fraction of the power of incandescent bulbs and is a fraction of the size. This solar stud light has 6 LED lights to provide a super bright light.

Blinking Solar Studs EASY TO USE – Safety and convenience merged into one with this solar stud. Safe enough to tackle any road, this solar stud light can be installed quickly and never needs to be touched again.
Solar LED road light is also known as solar sidewalk lift, reflective markers and solar warning devices.

Flashing Solar Stud Features:
With a pressure over 10 tons, solar stud is easy to install and flush with the ground.
Long service life, solar panels are laminated with PET, and will not delaminate in 3 years, and the power generation effect is good.
Solar stud adopts magnetron-controlled light-opening, transportation, storage, power saving, and static storage for more than one year.
Easy to maintain, you can directly replace the core components, breaking through the limitations of the one-time life of solar buried lights.

NOKIN solar round solar stud light. Visually remind pedestrians crossing the street not to cross the red light, but to cross the road safely by a light signal for pedestrians; develop a good civilized travel habit to ensure road safety; solar stud reflects the concern for humanity and the improvement of the image of urban roads.

NOKIN Solar Studs with Super high bright LED light, double-sided luminous, uniform illumination, soft light, no luster, good stability.And NOKIN solar studs have strong warning effect, visible distance up to 800 meters or more.Low energy consumption and environmental protection, low energy consumption and long service life.
Equipped with voltage regulator and anti-interference chip, safe and practical, low failure rate, easy to install.IP68 level waterproof, solar stud used as a safe solar warning light at crossroads, warning intersections, slow intersections, etc.

Solar stud lights automatically starts working when night falls or when inclement weather sets in. Power saving. No UV rays, environmentally friendly
This flashing solar stud lights is naturally charged by the sun. The battery may be out of stock due to long-term storage, it is not mal-funtion, please place it under sunlight to charge when in use.
Scene Application: The solar stud light is ideal for lighting walkways, decks, docks, boats, driveways, stairs, sidewalks.

Solar road studs are now widely accepted as essential for controlling traffic flow in many applications. In practice, Solar road studs operate above the road surface, sending clear and unambiguous messages to drivers, thus improving road conditions while enhancing safety.

These Solar Road Marker are automatically charged by solar energy. Once the sky gets dark, the LED lights in the Solar Road Marker automatically illuminate for up to 10 hours a night. The solar LED road studs are designed to specifically consider road safety to help prevent serious accidents and send out rather than reflect light.

NOKIN Solar Road Stud use high strength aluminum housing with excellent compressive strength and scratch resistance. With high brightness LED, Solar Road Stud can be seen 800 meters away and remind the driver of the road ahead. Meet the environmental requirements.

Solar Road Stud or lane / road markers are a low cost, independent, solar – rechargeable LED lighting marker. Solar Road Stud can be used to reduce speed, alert drivers to pedestrians, etc. Usually used for pointed corners, dangerous curves, crosswalk / shelters, concrete traffic islands, median / separator, bike lanes, speed bumps, lanes, combined lanes, roundways, guardrails, narrow bridges, intersections, etc. ,

Aluminum Solar Cat Eyes have strong aluminum housing and come with 75 mm long fixed pins. Aluminum Solar Cat Eyes are installed using chemical mortar or weather resistant adhesive to withstand 30 tons of axle weight and can be used in any traffic condition. The housing is fully sealed and provides IP68 waterproof properties, visible in 800 m , available in various colors.

Solar LED road studs with reflective LED markers, double – sided solar road studs combine independent powerful light sources with traditional reflectivity to provide unparalleled visibility and greatly improving road safety. In addition to being used as road studs, these LED solar road stud markers can also be installed in many other locations to cause attention to hazards and obstacles: sidewalks, zebra crossings, entrances or exits.

Solar Raised Pavement Markers are an automatically powered autonomous device usually installed on the road center line, lane boundaries and pedestrian crossings to clearly guide drivers and pedestrians during nighttime, rainy or foggy weather. During the day, Solar Raised Pavement Marker charge rechargeable cells through a small built – in solar panel module, so it acts as an effective safety mark in the darkness.

The Solar Road Stud Light “is simply an” active road stud ” with automatic switching, achieved by combining small solar panels, rechargeable cells and LED drive circuits. Today, road lighting systems have been widely considered essential to control flow in a large number of applications. In practice, such Solar Road Stud Light systems operate well above the pavement and use multiple well known and widely accepted colours where lights have specific directions to make a clear message to the driver, thereby improving road traffic while enhancing safety.

Solar Road Stud are dusk to dawn LED lights for up to 5 days at a charge. Because Solar Road Stud do not use conventional energy, but are powered by solar power, they must be used outdoors (in daylight) to build charges. Solar Road Stud provides flashing warning lights to warn drivers to pay more attention to the upcoming curve, middle or crosswalk. NOKIN solar road studs are manufactured according to safety standards with high visibility and effectively reduce the risk of traffic accidents. Safety first!

Solar Raised Pavement Marker neatly installed on sidewalks and bike lane lights provide trip – free overnight lighting, overnight dusk to dawn lighting will clearly define the sidewalk or bike lane. This premium Solar Raised Pavement Marker is at the forefront of solar technology and offers super capacitors instead of batteries for power storage to extend service life to more than 8 years. A choice of colors as well as static or flashing modes.

NOKIN Solar Road Pavement Markers, offering clear outlines and over 1, 000m after day and night, allows a customizable, highly visible Solar Road Pavement Markers road lighting system to increase lane discipline and reduce at roundabouts, road accident and collision intersections, crosswalks, bus stops, rail crossings and tunnels.

The raised Solar Road Stud (also known as “Solar cat eyes” ) absorb the energy of sunlight during the day and glow with high visibility LED lighting and backward reflectors, creating high visibility light that guides the driver and drive. Improve road safety. Solar LED road studs are also known as Solar elevated road face signs, solar reflective lane signs and solar warning devices.

These Solar Road Stud are like reflective studs, but power embedded LED lamps. Adding embedded LED lights to each stud benefits traditional reflectors. Since reaction time is mainly based on vision, Solar Road Stud provide drivers for up to 30 seconds and 3.2 seconds. Drivers with ten times open horizons can reduce the accident rate by up to 70% .

NOKIN Aluminum Solar Road Spike is divided into three parts design, fixing aluminum base to substrate, removable epoxy filled with interior components and non – slip polycarbonate lens. The Aluminum Solar Road Spike has IP68( diving) waterproof rating, weighs over 30 tons, ideal for road installation.

NOKIN TRFFIC specializes in producing solar products such as solar road markers, solar road signs, solar guardrail lights, Solar bricks, Solar road safety products, Solar traffic warning lights, Solar Edge warning lights, solar deck lights, solar road stud, and many more. Furthermore, we produce normal traffic products.