wholesale dirveway aluminium cat eye reflector solar road stud light

By contrast, our Solar Road Studs combine the use of retro-reflective strips with in-built high-intensity LEDs powered by harnessing free solar energy, resulting in a solution that delivers 10x greater visibility of the layout of the road ahead, so up to 900m. This increases the available time to scope out the route ahead, enabling you to adjust your behavior to the driving conditions ahead. Even in poor weather conditions, where other road markings become less visible, SolarLite surface road studs continue to shine through, guiding you safely. Just a few hours of daylight will provide enough battery power to last days – more than enough to ensure the system operates all year round whatever the weather and the location in the world.

Share:
Content

Benefits of Solar road stud 
By contrast, our Solar Road Studs combine the use of retro-reflective strips with in-built high-intensity LEDs powered by harnessing free solar energy, resulting in a solution that delivers 10x greater visibility of the layout of the road ahead, so up to 900m. This increases the available time to scope out the route ahead, enabling you to adjust your behavior to the driving conditions ahead. Even in poor weather conditions, where other road markings become less visible, SolarLite surface road studs continue to shine through, guiding you safely. Just a few hours of daylight will provide enough battery power to last days – more than enough to ensure the system operates all year round whatever the weather and the location in the world.
wholesale dirveway aluminium cat eye reflector solar road stud light
wholesale driveway aluminum cat eye reflector solar road stud light

SPECIFICATION:

Body material Hi-pressure Casting Aluminium alloy
Power supply Solar panel(mono crystalline 2.5V/0.25W)
Battery NI-MH 1.2V/600mAh to Lithium battery
LED Ultra bright diameter 5mm;6pcs double side
LED color Red, Yellow, Green, Blue, White
Working mode Blinking or constant(flashing frequency 2Hz, also can be made according to your requirements)
Visual distance >800m
Working hours Fully charged at 8 hours and can work 120hours continuously
Waterproof IP68
Life span >3years
Load Capacity >20T
Size L108mm*W97mm*H25mm  (L4.25″*W3.82″*H0.98″)
Packing 2pcs/box;  60pcs/ctn
Carton size 58.5*24.5*18.5cm   (23.03″*9.65*7.28″)
Carton weight 21kgs  (46.30bs)
wholesale dirveway aluminium cat eye reflector solar road stud light
wholesale driveway aluminum cat eye reflector solar road stud light

Installation Method Of Raised Solar Road Stud:

Carefully mark the distance between the placement of solar road stud lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 35mm and the depth will be 55mm.
Remove all debris from the installation hole.
Pour epoxy into the holes per the manufacturer’s instruction.
Verify that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the solar-led road stud shaft.
Set the lighting surface of the solar road stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar marker shaft. Verify the bottom of the solar road marker is firmly installed on the installation surface allowing for zero surface float; to occur. (space between installation surface and bottom of the solar marker).
After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility.
The recommended spacing between each solar road stud is as follows:
Highways and Expressways
7 – 8 yards (5 – 6 meters)
Dangerous Entrances and Exits
4 – 5 yards (2 – 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.
0.5 – 3 yards (0.5 – 2 meters)
The spacing between each solar stud is also according to your actual application requirements, the above values are for reference only.
Inquiry
* Name:
* Email:
Country:
Tel/Whatsapp:
* Message:
More