road stud reflectors

Strong, durable construction
SolarEye is built to withstand not just constant wear and tear from pedestrians and cyclists, but to withstand extreme temperatures, drenching rain, ice and snow.

One-piece sealed construction
Constructed with high impact durable engineering grade polycarbonate.

Safe for cyclists & pedestrians
Easy for cyclists / vehicles to move over. Low profile— only ¼” nom. above pathway surface when installed. Textured upper surface provides skid resistance and increased light capture from acute angles.

Solar Road Stud aluminium solar road stud with crystal LEDs and polycarbonate lens cover. Road studs, also called raised pavement markers, Botts` dots, cat`s eyes, or road turtles are used for lane delineation, especially during the hours of darkness and adverse weather conditions. They delineate the roads at the centre and at the edges and mark the parking in car parks, traffic islands, and the entrances of shopping malls, gas stations and sites. Raised pavement markers ensure high visibility with cat’s eye or reflectors. Some studs are mounted with epoxy on the road surface, others are fixed with single or double shanks. Solar road studs are just like reflective road studs but use solar energy to power embedded LED lights. They are made of metal or durable tempered glass and can withstand a weight of ca.40 tons

Solar pavement markers, also called solar cat eyes, use the principle of solar lighting system to integrate a set of components including the LED light source, energy storage battery, and charging solar panel in the traditional reflective road stud. At night or under the condition of insufficient brightness, it can actively emit amber, white, green, red, or blue lights, and at the same time with high reflective film, accurately and safely outline the forward direction of the road, which greatly provides road driving security.

Solar road studs are one of the most important devices to keep cars from veering off the road or driveway and make our roads safer. Solar road studs reflect light from car headlights, allowing drivers to observe the curves and corners of the road from a distance. Even in the dark, the driver can easily see the route, end point and corner of the road, and judge where to turn and which lane of the road to take, so as to drive safely. This makes the stud very useful on roads with low light. They provide effective nighttime guidance even in adverse weather conditions.

Where NOKIN plastic road marker really shines, though, is at nighttime, or in areas with little ambient light. These Plastic road markers will catch and amplify the small amounts of light provided by car and bicycle headlamps, giving them an illuminated appearance. There is no batteries to replace or panels to charge; just install the pieces and you are good to go!

Light Emitting Diode solar road studs improve the safety of intersection approaches, as well as pedestrian, bicycle and other crossings. These yelow plastic solar road studs enhance delineation and driver awareness, especially in low visibility conditions.

LED amber plastic solar road studs function similarly to standard reflective pavement markers, but have small LEDs located inside of them instead of (or in addition to, retroreflective components).
LED solar road studs have built in sensors that can automatically turn on the LEDs when ambient light drops below a preset level or can be wired to operate as an active treatment in conjunction with vehicle detection.

How to install road pavement markers? Road pavement markers can be applied with butyl pads (peel and stick), epoxy, or bitumen (asphalt). They are designed for commercial use on existing and new asphalt and concrete road surfaces.

Please verify any local rules and regulations regarding the use of Plastic road stud in your area. In most municipalities, certain colors should only be used to convey specific messages. For example, blue road stud are for drawing attention to the presence of a fire hydrant nearby. Additionally, red and white Plastic road stud should only be installed on one-way roads or highway ramps with the white side facing towards oncoming traffic; the red Plastic road stud is meant to serve as a ¡°Do Not Enter¡± / ¡°Wrong Way¡± indicator for drivers

Yellow ABS solar road marker increase the visibility of intersections during low-visibility conditions (e.g., darkness and inclement weather). Solar road stud Illumination of intersection approaches and crossings helps improve road user recognition of intersection location and features.

At intersections with vertical or horizontal curves causing limited sight distance for traffic entering the intersection, LED solar road studs can help provide advance notification to drivers of potential vehicle conflicts. At rural intersections, where powered lighting may not be available, the use of solar-powered road stud may provide an alternative safety treatment.

Plastic solar road markers are more visible than retroreflective raised pavement markers under conditions that reduce the effectiveness of headlights and retroreflective material (e.g., inclement weather). Hardwired LED road studs have been found to be brighter than solar-powered models.

For infrastructure applications, white or red LED solar road marker lights are usually specified. For decorative and architectural applications, other colours are more common, such as green, orange, blue and yellow. The lights of the solar road marker function at different settings: they can emit steady light or they can blink.

NOKIN Durable, highly reflective road stud can with pressure sensative adhesive; may be applied to asphalt and concrete road surfaces. Impact and weather resistant. Diamond Grade plastic road stud optics provide excellent during wet and dry conditions.

BUTYL PAD INSTALLATION: This method is the most common method of install ABS road stud. Butyl pads are sold as individual precut squares, commonly in 4 in. or 8 in. sizes. The butyl pads are composed of a double sided adhesion compound, which involves a simple peel and stick theory of installation. It is not recommended to install ABS road stud to a wet or damp surface. For best results install to a clean and dry area.

TWO PART EPOXY INSTALLATION Plastic road stud: This method consists of 2 part epoxy kits A & B. Each 1 qt container should install approximately 25 four inch Plastic road stud and the 1 gal container should install approximately 75-100 four inch Plastic road stud. It is recommended that you follow the instructions for installation as detailed by the manufacturer as noted on the epoxy kits.

Embedded in the road surface, solar road markers are an electronic improvement on the traditional road stud in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intense brightness of the LEDs makes solar road marker easily visible at distances of about 900m under favorable conditions

BITUMINOUS ADHESIVE: This method is also referred to as QwikDots. This method is the most cost efficient form of install plastic road marker when installing 4 in. Plastic road Markers in excess of 230 pieces. This material is available in 4 in. widths in one continuous 150 in. piece. Much like the butyl pads this is a double sided adhesion compound; however this method of application would involve cutting each piece to the desired size.

The metal road marker road studs are made of durable aluminium alloy AISi 12. Road stud markers is designed in such a way that when installed into the asphalt the fixation element prohibits the road stud from rotating. It is double sided and each side consists of three reflective glass elements of white or yellow color or of a large prismatic reflective element made by polycarbonate.

Pavement markers. Road studs. Cats eyes. Whatever you want to call them, these little blocks can be the key to a better driving experience! PC road stud in a range of colors to suit a variety of traffic and/or parking scenarios.

Plastic road studs have great versatility in their use whether during nighttime, daytime, in foggy or poor weather conditions. In addition they offer various colour options to meet the requirements of the road traffic legislation for specific traffic alerts and provide audible warnings for wandering drivers, plus durability in heavy road traffic use, even against snowploughs.

Reflective road studs use reflectors to mark multi-lane highways, two-lane roads, roadways, construction zone entrances and exits, and even individual spaces in small parking lots. Between their appearance and raised texture, road stud will help keep existing lanes organized, temporarily stand-in for painted lines on freshly paved surfaces, and overall just make roads safer and easier to navigate.

The white ABS road pavement markerss are used for such as centre of road markings in conjunction with white lines, as well as for lane markings, double white lines and traffic islands. Red ABS road pavement markers are used to demarcate the edge of the hard shoulder of motorways, plus the highway boundary of dual carriageways and major roads, whilst amber road pavement markers are used to mark the boundary of central reservations and green coloured road studs are used to identify slip road and junction exits. Countless millions of cats eyes have been installed on roads throughout the UK and the World and have been responsible for an immeasurable contribution to road safety.

NOKIN Plastic raised pavement markers are brightly-colored and easily visible during the daytime. Any vehicle that passes over Plastic raised pavement marker will feel a small but unmissable bump, notifying them that they are drifting outside of established driving boundaries.

The invention of the cat eye road stud was a great success. In 2001, the road pavement marker road stud was chosen as the greatest design of the 20th century. With the characteristics of “simple”, “practical” and “beautiful”, the cat eye road stud is well deserved!

Engineer Percy Shaw avoided falling off a cliff when she saw the light from a cat eye on her way home. This event inspired him, and then he invented the cat eye road stud. At that time, the cat eye road studs were made of glass.

Percy Shaw made a lot of cat eye road stud markers. The head of the cat eye road stud marker is made of smooth round glass, and the lower end is nailed into the road, which is nailed into a row to make the indicator light.

Solar Road Stud. Used to mark road edges and centrelines. It is mounted on the road surface and flashes to warn the drivers. ABS solar road stud is equipped with long lasting LEDs and runs for many years without maintenance. The LEDs are designed to be visible from a distance of about 1 km.

Durable, highly reflective road pavement markers with pressure sensative adhesive; may be applied to asphalt and Portland cement concrete road surfaces. Impact and weather resistant. Diamond Grade optics provide excellent wet and dry reflectance.

Amber ABS road pavement markers designed for use in construction zones in conjunction with or in place of temporary tape or paint. The glossy amber or white housing offers high visibility day or night. 1.6 square inches of reflective area on each side makes it the most reflective road pavement marker in today’s marketplace.

Raised road Pavement Markers with pressure sensitive adhesive are applied using the supplied pressure sensitive adhesive pad. Designed for application on asphalt and Portland cement concrete road surfaces. These plastic road pavement markers provide highly effective, long-life visibility, particularly at night and in wet weather.

Reflective road stud markers at low wholesale prices. Road studs and highway pavement reflectors provide additional information and cues for drivers going through hazardous work zone areas. NOKIN has one of the largest assortments of road reflectors and raised pavement markers online.

These plsatic road pavement markers are made of a durable ABS plastic shell filled with an inert thermosetting compound. The bottom of these plsatic road pavement markers are configured to create an excellent structural bond with the pavement. Each reflector is available in various colors and reflective options.

Plastic raised pavement marker Installation Recommendations: Plastic raised pavement marker can be installed in a variety of methods, and we offer several products that can be used to adhere to reflectors to paved surfaces.

A road stud is a safety device used on roads. These road studs are usually made with plastic, ceramic, thermoplastic paint, glass or occasionally metal, and come in a variety of shapes and colors.

Use of solar road studs reduces the necessity of headlight main beams and the accompanying hazard of dazzling oncoming drivers. White PC solar road stud are also more visible in rain and fog conditions where the old type retroreflectors and road markings are problematic. The solar cells charge batteries or capacitors during sunlit hours, over which period the flashing LEDs are turned off by a photoswitch.

Yellow ABS raised pavement marker, such as plastic, ceramic, metal ones, include a lens or sheeting that enhances their visibility by retroreflecting automotive headlights, while glass road studs raised pavement marker gather automotive headlights with a dome shape and reflect the lights with a reflective layer within.

Amber PC road pavement markers are used on roads and motorways across the country, and are a vital tool for motorists when driving at night, marking the path ahead by reflecting the light shined on road stud markers by the headlights of oncoming vehicles.

Raised pavement markers (RPMs) or delineators are a safety and visibility device used on roads. These white PC road pavement markers measure 100 mm x 75 mm and offer excellent visibility to oncoming motorists via the double sided reflective material that reflects car headlights.

The PC road markers provide highly effective visibility even at night or during rain. Yellow raised pavement road markers can be easily fixed to asphalt pavements with a strong adhesive.

Plastic raised pavement marker are used for dividing roads, separating roads or lane arrangement within the scope of traffic and road safety. Usually, there are reflective material or reflector on raised pavement marker. The reflectors (known as cat eyes) are small but important material acts as a light by reflecting the vehicle headlights.

Reflectors in road pavement martkers are used in three ways: Reflective sheet, plastic reflector, glass bead. Glass beads have the longest life span and reflective sheets have the shortest life span among those reflector types. Usually, plastic reflectors and reflective sheets in road pavement makers are preferred in temporary road maintenance works. Using glass beads would be beneficial in permanent places or the places where it is expected to last longer.

Amber PC road pavement markers which consist of housing and reflector are mounted on road or related place with screw and fixing plug. Road pavement markers with rods are mounted on roads with stud method and fixed to the ground with epoxy-style adhesives.

The size of the related road stud marker is decided according to the area of usage. Especially, deciding of height is very important for the use of road stud marker. Will it be used to lower the speed? or will it be used for lane arrangement?

Reflective road studs marker provide most effective night guidance even under the most adverse weather conditions. Road Stud markers are available in different sizes to delineate both the carriage way at the center and at the edges of roads. These are available in aluminum as well as in rigid ABS plastic. The special material composition enables the road studs to bear severe impacts.

Road stud marker, is used in the road pavement making to guide the vehicles driving on the right roadway and reduce the accidents to keep traffic safe. So, it is also called road pavement marker.

Amber ABS solar road stud provide a significant increase in the effective warning distance for drivers. Flashing models of solar road studs ¡®flag¡¯ driver attention and can help reduce speed.Help reduce pedestrian and vehicle accidents caused by poor weather conditions such as rain or fog which can make road lines and other road safety features almost invisible at night.

The NOKIN white Plastic solar road stud, LED illuminated raised pavement solar marker is a low cost, maintenance-free and effective alternative to overhead street lighting.

The road stud can be divided into plastic road stud, aluminum road stud and glass road stud by material. And the plastic type can be pvc road stud and abs road stud. The aluminum type can be 3M aluminum road stud, solar aluminum road stud and aluminum road stud with nail.

A raised pavement marker is a safety device used on roads. These devices are usually made with plastic, ceramic, thermoplastic paint or occasionally metal, and come in a variety of shapes and colors. Raised reflective markers include a lens or sheeting that enhances their visibility by reflecting automotive headlights. Some other names for specific types of raised pavement markers include convex vibration lines, Botts’ dots, delineators, cat’s eyes, road studs, or road turtles. Sometimes they are simply referred to as “reflectors”.

Road pavement markers is used for dividing the road boundary,for safety,reducing the accidents,road pavement markers road stud made from aluminium alloy attached with the reflective sheet made from the acrylic plastic sheet.This acrylic is a reflective prism glass style and available 1 or 2 sides on road stud. In addition,there will be thin layer of the coated glass in order to enhance the reflective index during night time.

Powered by a very efficient and long life super capacitor, solar road studs provide superior road/ path visibility while avoiding the problems associated with battery-powered markers. Solar road stud is the first and only product to offer the advanced newest technology of capacitor unit as an energy source.

The yellow road stud is what’s called a retroreflective safety device ¨C road stud reflects light back to the source (i.e. your headlights). Originally cat eye road studs were only used down the centre of the road whereby one cat¡¯s eye had four glass spheres set into a white rubber dome, two spheres facing each direction up the road.

Plastic amber ABS road marker are made of high density polyethylene. amber ABS road marker are ideal for permanent or temporary marking. They have a high degree of visibility during the day because of the white or yellow colour of the body, and during the night because of the prismatic acrylic reflectors that they incorporate. In case of rain they retain their reflective characteristics because of the raised body from the surface of the asphalt.